Min-Jie Chen, 陳民杰

碩士 / 國立臺灣海洋大學 / 河海工程學系 / 95 / Abstract This study consists of two tasks, one of which investigates in Port of Kaohsiung bed scour distributions at container ship berths. The other is aimed at experimentally measuring flow fields by stern propeller in the vicinity of a quay wall. Experiments were carried out in a water basin with utilization of a model 6-blade propeller of reduction ratio of 1/30 to a prototype container ship’s propeller. Analysis of hydrograph of 12 container ship berths has sho...

Kuan-heng Chen, 陳冠亨

碩士 / 國立成功大學 / 系統及船舶機電工程學系碩博士班 / 95 / The main purpose of the present thesis can be described in three parts: (1) to establish the ship steering system in waves by virtual reality technique (2)to extend (1) to simulate the ship towing system (3) to simulate the three dimensional virtual random waves. Based on the nonlinear mathematical model including the seakeeping and maneuvering characteristics of the ship, the present study integrates the six degrees of freedom motion platform to form a real ...

Deng-Kai Hu, 胡登凱

碩士 / 國立成功大學 / 系統及船舶機電工程學系碩博士班 / 95 / In the paper, the motions of the trimaran ship, with coupled effect of steady flow potential and unsteady potential, advancing in regular wave are studied. The three dimensional pulsating source is applied to solve the unsteady potential which is needed for diffraction and radiation problems and the translating source is used solve the steady flow potential. With the unsteady and steady potentials, the related resultant pressure field, resultant wave elevatio...

Hui-Kuo Chang, 張惠國

博士 / 國立成功大學 / 系統及船舶機電工程學系碩博士班 / 92 / This study presents the hub of an AI-based (artificial intelligence) ship security monitoring system designed to supervise three different maritime monitoring tasks, including propeller-shaft fault detection and diagnosis, human medical diagnosis, and smoke- and temperature-based fire alarm. Particular software for the three tasks is developed using a combination of symbiotic evolution, fuzzy clustering, adaptive fuzzy classification, back-propagation neural ...

Chun-Hung Lin, 林君虹

碩士 / 國立交通大學 / 經營管理研究所 / 95 / According to the Point Topic Report of global broadband network in the end of 2004, there are about 150,500,000 consumers especially in the Asia Pacific Zone which including 43% of the world. China’s global broadband network consumer ranking is the second in the world. Otherwise, PDAY Research indicated that the growth rate of global electric commence is 25.3% and the realized rate is 15%~20% of the world. However, according to the research of board of trade showed t...

Chun-An Tu, 凃俊安

碩士 / 國防大學理工學院 / 造船及海洋工程碩士班 / 97 / When the ship sails on water, the magnitude of its hull resistance has significant influence on its sailing speed and required propulsive horsepower. With continuous development of ship science and technology, the ship design has stepped into large-scale and fast pace, it is a popular research topic in marine engineering field on how to effectively reduce ship resistance for improving its sailing efficiency. Generally speaking, with regard to calculation of hull...

Tai-ling Lin, 林岱陵

碩士 / 國立成功大學 / 系統及船舶機電工程學系碩博士班 / 95 / The present paper presents the source distribution method with the three dimensional pulsating source to analyze the corresponding hydrodynamic problems for the catamaran ship in waves. The phase transfer method is applied to simplify the six degrees of freedom motion prediction, which neglects the interaction between two hulls. In the present method, only the related hydrodynamic coefficients for the monohull are calculated and the phase transfer for each hu...

Lin YuBo, 林裕柏

碩士 / 中國文化大學 / 勞工研究所 / 90 /

Ming-Chu Su, 蘇銘注

碩士 / 國立成功大學 / 造船工程學系 / 82 / This paper discuss the crack growth in a swath ship at the junction of the strut and the main hull,where the stress concentration is inevitable due to the change of geometry. The micro-cracks induced by faulty welding will eventually grow during the operation at sea.The wave loading conditions are calculated according to the linear strip therom.The pos- sibility distribution of d...

Ming Ying, Lu, 盧明瑛

碩士 / 國立成功大學 / 造船工程學系 / 82 / The purpose of this study is to investigate the static and dynamic structuralresponses of the small-waterplane-area twin- hull(SWATH)ship under harmonic wave excitation.The study is carried out by means of finite element analysis,in which the program "MSC/NASTRAN" and the pre-post processor "MSC/XL" are used. In the static analysis,three kinds of loading conditions, 1.still water...

Chen, Jone-Zen, 陳忠忍

碩士 / 國立成功大學 / 造船工程學系 / 86 / Air pollution is a large proplem in our world. So the ship diesel engine exhaustneed control too. This paper bring up application wet scrubbing method to purify the ship diesel engine exhaust. We select three kinds purify pharmaceuticalsthat are fresh water,sea water and urea. After an experiment find that bothsea water and urea have a good effect. Urea is the best purify pharmac...

Gia-Wen Chou, 周嘉文

碩士 / 國防大學中正理工學院 / 造船工程研究所 / 96 / Simultaneous recording of shear and pressure is a critical issue for studying the causes of the fatigue damage in ship structure. In order to obtain a meaningful stress distribution around the “hot point” of ship structure, a novel optical sensor for pressure and shear sensing was designed and tested. The sensing principle is based on the bending loss of optical fibers. When external forces applied to the sensor, the optical fibers will bend and cause the light t...

Der-Ming Chen, 陳德銘

碩士 / 國立臺灣海洋大學 / 商船學系所 / 95 / ABSTRACT The environment problem is an intriguing problem complex which the humanity faces, the ecology destroys, the environmental pollution and the whole world changes, the ozone layer warmly destroys, acid rain and so on global the atmospheric environment problems. Also has other some more prominent aspect in the environment problem, like the energy and the resources problem, the marine pollution problem, the dangerous waste border crossing shift problem, the urba...

Bao-Ann Chang, 張寶安

碩士 / 國立臺灣海洋大學 / 商船學系所 / 95 / Abstract The International Maritime Organization (IMO) issued the International Safety Management Code (ISM Code) and brought it into force on July 01 1998. This regulation created the model of safety management for merchant marine. Since the implementation of ISM Code, the quality of safety and environment protection has been improved obviously. The natures of cargoes carried by tanker ships are explosive; polluted and toxic. The higher standard is required on tan...

Yu-AnChang, 張佑安

碩士 / 國立成功大學 / 系統及船舶機電工程學系 / 106

Jen-Chiang Chang, 張任強

碩士 / 國立金門大學 / 土木與工程管理學系碩士班 / 103 / Along with the to and from of the “Jinsha Three Link” is becoming increasingly frequent, the carrying and transit time of the ship transportation are growing up as well. There was a fire incident happened to the “ Tong An ” vessel in 2008. Though there was no report of casualties, but this occurrence reminds that the strategies of the disaster prevention and the fire devastating control should be developed immediately. According to the Fire Dynamics Simulation,...

Han-Yuan Tsai, 蔡翰元

碩士 / 中華大學 / 科技管理學系(所) / 97 /

Yen, Chun-Mu, 顏春木

碩士 / 國立高雄應用科技大學 / 工業工程與管理系碩士在職專班 / 103 / Since ancient times, the ship is international and regional exchange of main marine transport cargo and personnel transport, about ninety percent of the goods are transported by sea, and People in all activities at sea are required depending on the ship, the ship towards the large-scale and diversified development, also contributed to the construction of global ship number growth, people on the transport and use are more dependent on ship. Therefore, in o...

Hua-Yang Cheng, 鄭華陽

碩士 / 國立屏東科技大學 / 企業管理系所 / 102 / The research and historical documents on the studies of building King Ship in Ying Wang Ritual we found nowadays are mainly focused on the origin of the King Ship, rundown of the ritual itself, formation and colored drawings of the King Ship. Relevant records on building King Ship mostly concentrated on the procedure of ship-building, while discussions on details in building process, methodology, structure, executing committee and management of the King Ship buildi...

Tai-ShiungShih, 施岱雄

碩士 / 國立成功大學 / 系統及船舶機電工程學系 / 107

Hao-SiangHuang, 黃浩翔

碩士 / 國立成功大學 / 系統及船舶機電工程學系 / 107

Yi-ChiLo, 羅翊齊

碩士 / 國立成功大學 / 系統及船舶機電工程學系 / 107 / The main goal of this study is to propose a correction formula to revise the blockage effect for ship drag by CFD method. The final objective is to develop one resistance corrected formula and one velocity corrected formula with respect to the section ratio, Froude number, width ratio, depth ratio and Cb for correcting the blockage effect of NCKU towing tank. It is quite common to apply model test in towing tank to acquire ship resistance and hydrodynamic coeff...

Li, Ya-Chi, 李雅琪

碩士 / 國立高雄海洋科技大學 / 輪機工程研究所 / 102 / Three-dimensional cable arrangement is an important component of 3D engine room arrangement design. There exist many similarity between cable arrangement and piping arrangement, for instance, both can form network from which connectivity paths can be searched. However, the design and construction information of cables need to be investigated prior to using trunk-based piping arrangement tools for cable arrangement. This research analyzes the cable arrangement...

Jr-Liang Chen, 陳智良

碩士 / 國立高雄海洋科技大學 / 輪機工程研究所 / 102 / Ship shore power connection issue is essential and important for green port and clean harbor city around the world. From a whole grid point of view, the ship electric power system is connected to the onshore grid to become a part of onshore power networks through the shore power connection, which has increased the complexity of the short-circuit current analysis of ship power systems. To exactly calculate short-circuit currents at different fault points in the s...

CHEN, WEI-LUN, 陳威倫

碩士 / 國立臺北科技大學 / 電機工程系 / 107 / Synthetic aperture radar (SAR) is a radar with superior traversal. The radar emits energy, then get the reflects after reaches the surface. Compared with visible light, it can easily penetrate the clouds and is not affected by climate conditions. SAR has a wide range of object detection and monitoring, and produce high-resolution images, also has been widely used in aviation and spacecraft. This study obtained the ship and oil spill dataset(SOSD) and SAR ship detect...

I-Chung Chen, 陳藝中

碩士 / 崑山科技大學 / 機械工程研究所 / 106 / In this paper produced a small volume of high volume double horns on ship to solve the unexpected situation during navigation. This paper first designed and manufactured a small volume of high volume double horns on ship and tested it's performance. Finally , the design of the product compare with the general common horn on ship have the following advantages: 1. Small size 2. Low cost 3. No rusty 4. Good heat dissipation 5. The sound quality is strong and loud, and ...

CHANG,CHIA-YAO, 張家堯

碩士 / 正修科技大學 / 電子工程研究所 / 107 / This research is to develop an intelligent platform suitable for ship safety protection and disaster emergency rescue, and to assist the ship repair course damage management operation support system. Through the integration of network engineering, electromechanical integration, information engineering, communication transmission, sensing electromechanical, software engineering and ship safety rescue technology, pragmatic combination of ship damage management and saf...

Shih, Po-Yuan, 施博元

碩士 / 國立臺灣海洋大學 / 航運管理學系 / 106 / The ship-scrapping usually refers to the process of dismantling abandoned ships and reuse or recycle the steel and parts. According to IMO statistics, an average of more than 700 ships is recycled every year. The common practice in the maritime industry is to export ships to major ship-scrapping countries (mostly are located in South Asia, such as India, Pakistan, and Bangladesh) as these countries have cheap labor, massive demand for steel and the suitable coastli...

Chih Yu Hsiao, 蕭志宇

碩士 / 國立臺北科技大學 / 電機工程系 / 106

CHENG,MING-HONG, 陳明鴻

碩士 / 正修科技大學 / 機電工程研究所 / 106 / Ships are important transportation vehicles nowadays. For island states and other Gulf countries, they can generate a big part of the national economic revenue, but how to reduce the cost of shipbuilding and have a better structural strength of the hull. By changing the structure of the hull, we learn about their implications to the hulls stability. Because the number of cabin plates has always been determined by the long-established and experienced shipbuilding ind...

Fu-Kai Tsao, 曹富凱

碩士 / 國立中央大學 / 會計研究所 / 105 / In the global economical environment the semiconductor industry competition is increasingly fierce, production and delivery cycle is extremely important competitiveness and management indicators. As the consumer electronics products are light, thin, small, high performance and short life cycle characteristics, the process is increasingly complex, with the Moore's Law may fail, semiconductor equipment, materials and processes continue to be refined to ensure that the c...

Chen, You-Ning, 陳又寧

碩士 / 國立交通大學 / 運輸與物流管理學系 / 104 / In recent years, the cruise industry is booming. With the saturation of American cruise market, the development focus of the cruise industry is gradually moving to Asia, which is the cruise emerging market. In 2015, there are 660 thousand passengers pass in and out in Taiwan, which has grown three times as in 2007. Although a large number of cruise in Port can revitalize the economy and promote tourism development to the Port City, too many tourists will also have...

Bon-Kie Chia, 謝文記

碩士 / 國立臺灣大學 / 工程科學及海洋工程學研究所 / 105 / The PD and fuzzy control autopilot system were tested on a free running model system to study the energy saving efficiency of the autopilot system. The free running model ship can automatically control and maintain a stable speed and straight route by these two automatic steering control system. The route information was collected by the designed program and can be displayed real-time to check the reliability of experimental data. The test results show that th...

PAN, MING-HUI, 潘明輝

碩士 / 靜宜大學 / 管理碩士在職專班 / 106 / Maritime transport and logistics industries contains known maritime transport of container and liquid cargo and bulk & grocery material maritime transportation three categories, however container marine transportation, since the 1970s jumps to maritime transport the major transport supply chain; container marine transportation has not yet become a major transportation supply chain, but to bulk & grocery vessel transport to the main lead. Although the container marine...

Chen, Yan-Cheng, 陳彥棖

碩士 / 國立臺灣海洋大學 / 系統工程暨造船學系 / 106 / In this research, the level of noise and vibration of the engine room, steering gear room and Tally office of a 2800TEU container ship were investigated by on-site measurements which include the utilization of accelerometers, microphones and acoustic cameras. Additionally, the estimation procedure of cabin noise is established, and the results of the measurement and analysis show the same trend. First, taking the acoustic camera is used to find the locations hav...

Chang, Keng-Wei, 張耕瑋

碩士 / 國立臺灣海洋大學 / 系統工程暨造船學系 / 106 / The purpose of this study is to develop a numerical method which can solve the fluid-structure interaction (FSI) for near coastal ship behavior. The general structural response of ships is described by Mindlin plate theory and wave behavior is modeled by the shallow water equation. In this study, we introduce the isogeometric analysis (IGA) method for the unified domain discretization for both fluid and ship behavior. The IGA method uses the non-uniform rational...

Yu -Sheng, Huang, 黃玉盛

碩士 / 國立臺灣海洋大學 / 海洋環境資訊系 / 105 / This study focused on that the emissions from shipping activities pollutants around the port of Keelung and the effect produced by the air. The study data collection period from 2011 to 2015 of 936,076 and 331,500 monitor data, physicochemical characteristic analysis discussion main ingredient to influence the port. Keelung stations and EPA stations the calendar year, air quality monitoring station measured values of the concentration curve over time, and EPA stat...

Shen, Jian-Hung, 沈劍虹

碩士 / 國立臺灣海洋大學 / 商船學系 / 105 / Port State Control(PSC)has developed a series of minimum international standard for inspection agencies, personnel as the basis for inspection, each regional PSC on this system to build a set of ships selection system. This study is intended to PSC in the selection of inspection ships, In addition to the previous ship inspection report and other inspection standard as an inspection ship selection standard. It is also possible to incorporate the ship's defects data re...

Chen, Yin-Min, 陳胤旻

碩士 / 國立臺灣海洋大學 / 輪機工程學系 / 105 / In this thesis, we apply the macromolecule multilayer sandwich structure (MMSS) and different geometric design to reduce the radiation noise from submerged structure. Recently, it is very popular issue for under water noise and under water geometric design in the ocean engineering field. For the marine main engine, propeller, marine shafting, and wave, ones are main noisy sources, which cause the vibration and radiation noise under water. Therefore, it is our aim t...

Hung,Shih-Hui, 洪詩卉

碩士 / 國立高雄海洋科技大學 / 航運管理研究所 / 106 / Taiwan is surrounded by ocean with many smaller islands around. There are not only high-priced airliners transporting passengers between Taiwan and other surrounding islands, ferries do the job as well. For sea transportation, the ferry company between Taiwan and Penghu is the most frequent. This study focuses on the sea routes between Kaohsiung and Magong as well as between Budai and Magong. The three purposes of this study are: 1. Exploring the current sea rou...

Tsai, Chung-Ju, 蔡忠儒

碩士 / 國立臺灣海洋大學 / 系統工程暨造船學系 / 106 / As the technology of engineering developed rapidly, the sizes of the ships for maritime transport are increasing these days. In order to raise the carrying capacity and decrease the transportation cost of a unit cargo. The seakeeping performance of ships has been changed along with their growing size in the same ocean environment. The motion and wave load responses in the open sea will be different from small size vessel. Furthermore, the characteristic of struc...

Lai, Sin-An, 賴信安

碩士 / 國立臺灣海洋大學 / 系統工程暨造船學系 / 106 / In this thesis, the propeller performance in seaway is investigated by computations. In order to understand different effects individually, three different situations, incline shaft, ship motion and free surface are discussed. We can categorize incline shaft and ship motion effects as inflow variations due to ship position changes, and free surface effect as change of the physical environment around the propeller. Steady and unsteady viscous flow RANS methods, s...

CHEN, BO-GAO, 陳柏高

碩士 / 國立高雄科技大學 / 造船及海洋工程系 / 107 / The anti-shocking capability of the ship is one of the important conditions to suit the mission. This paper takes the reaction of the GRP monocoque (frameless) construction ship under the underwater explosion as the research object. First using MSC.Dytran to establish a simulation model of TNT in underwater explosions, verify the relevant parameters settings; then establish ship model, analyze its response of various parts under underwater explosion, and use Tsai...

Jung-Chueh Kao, 高榮爵

碩士 / 國立中山大學 / 高階經營碩士班 / 106 / Taiwan is an island, which is surrounded by sea. It makes the import and export trade have the direct influence on economic development in Taiwan. The export in Taiwan is mainly transported by shipping which brings about great advances in the marine industry. Some domestic well-known shipping companies even have a place in the international maritime industry. The marine industry is including the ship Research and development (R&D) and design, shipyards, equipment of...

SU,CHING-TANG, 蘇慶堂

碩士 / 國立高雄科技大學 / 工業工程與管理系 / 107 / A Study of Application of Ship Pedestal Perfusion –J Company as an Example Student：Su Ching-Tang Advisors：Dr.Shu Ming-Hung Industrial Engineering and Management National Kaohsiung University of Science and Technology ABSTRACT The development of this thesis is mainly for the engine and ship machinery of the ship. The LOCTITE marine epoxy resin block with the national ship certification has a great performance compared with the traditional construction ...

CHEN,CHIEN-CHANG, 陳建璋

碩士 / 國防大學理工學院 / 造船及海洋工程碩士班 / 107 / It is important that ship should maintain a satisfactory availability in all systems to meet the demanding requirement of mission. In associated with that, it will certainly directly affect the maneuverability as well as the safety of the ship in navigation of sea transport. This study provides the availability analysis method for the main engine auxiliary system . According to the maintenance plan it can be divided into two parts as corrective maintenance (CM)...

Shih-Chun Lin, 林士鈞

碩士 / 國立中央大學 / 土木工程研究所 / 94 / A good ship routing and shipment scheduling is more important for shipping carriers. They are essential to shipping carriers’ profitability, level of service and competitive capability in the market. However, most of the shipping carriers in Taiwan currently adopt a trial-and-error process for ship routing and shipment scheduling practices. Such an approach is considered to be less efficient, and can possibly result in an inferior feasible solution. In the past, most...

JHUANG, YUE-LONG, 莊岳龍

碩士 / 國立高雄第一科技大學 / 運籌管理系碩士班 / 105 / In order to avoid the prices of the ships to be affected by the size of ships, the ship tonnages and ship types are being used to categorize and then formulate into price index of ship. However, this approach of formulating price index is still not capable of completely separating the influence of the age and type of ship. Most importantly, a perfect ship price index is expected to differentiate the price change that is derived from the demand and supply of the...

Hsia, Pang-Hsin, 夏邦興

碩士 / 國立臺灣海洋大學 / 商船學系 / 104 / The development of world trade and economics made the traffic density near the regions of coastal and harbor increasing. And further, ship large-sized trend makes navigation safety issues become relatively complex. Which therefore, large-size ships navigating in/outbound harbor is an important and challenging issues. In recent years, progress in computer technology, developing low cost and high efficiency methods of ship manoeuvering simulation to study and assess t...

Lai, I-Fu, 賴亦甫

碩士 / 國立臺灣海洋大學 / 輪機工程學系 / 104 / This research of the paper is focused on the study of the sterilization of sea water. In this study, two experimetal parts that are the static and dynamic sterilization are fulfiled. In the experimetal part of the static sterilization, the sheet of silver is used as an electrode and place it into the static seawater to produce the electrolysis silver ions to sterilizate the seawater. The numbers of enterococci and E. coli, as well as conductivity and concentration ...