Lin, Jhih-Syuan, 林致瑄

碩士 / 國立交通大學 / 運輸與物流管理學系 / 103 / Multi-compartment vehicle routing problem (MC-VRP) is an extension of the classical Vehicle Routing Problem with multiple products which must be stored in the given compartment in the vehicle. The main difference between MC-VRP and VRP is the compartment capacity limit for various products and customer’s different products could be delivery separately namely set of requested products can be delivered in several times. In this thesis, we applied the particle swarm ...

Wei-Chieh Kuo, 郭維杰

碩士 / 淡江大學 / 土木工程研究所 / 83 /

Lin, Chin-Cheng, 林志成

碩士 / 國立海洋大學 / 航運管理學系 / 86 /

Pao-Hui Wang, 王寶慧

碩士 / 國立中興大學 / 土木工程學系所 / 100 / The purpose of this paper is to investigate numerically the wave and flow characteristics of solitary wave on the new type breakwater with wave chamber, including wave pressure, reflection, turbulent energy and dissipation and characteristics of impulsive force. A computational fluid dynamic model, Flow-3D, was applied to the numerical simulation based on the three-dimensional RANS equation associated with the RNG turbulent model. The numerical results of wave profi...

Jian-Chih Lin, 林建志

碩士 / 國立中興大學 / 土木工程學系所 / 98 / In this thesis, a series of experiments were conducted for the investigations of the wave characteristics in front of a caisson breakwater with wave-absorbing chamber. The perforated wall of the wave chamber consists of sloping-slit in the upper part and vertical-slit in the lower part. In the experiments, both the time history of wave profiles and the wave pressures at the wall of caisson were measured, and compared with the numerical simulations using CFD code, Flo...

Po-Tung Wang, 王柏棟

碩士 / 國立中興大學 / 土木工程學系所 / 98 / It is well known that a perforated-wall caisson breakwater not only reduces the wave reflection but also reduced the wave forces when comparing to a traditional caisson breakwater. During the past several decades, hydraulic model tests and mathematical models were performed for predicting the wave reflection of a perforated-wall. In this thesis, the numerical simulation was presented to investigate the characteristics of wave and turbulent energy dissipation of the c...

Tzu-Ying Lee, 李姿瑩

碩士 / 國立高雄海洋科技大學 / 造船及海洋工程研究所 / 103 / When container ship develops into a larger scale, it places an extra load on its hull structure. Spring effect will cause the ship to bear additional load, which results in substantial reduction in the fatigue life. According to the CSBC’s 8,000TEU container ship research, the results indicated that the fatigue damage and the stress concentration were easily yielded at the hatch corner of the midship. In order to ameliorate this problem, our research group pr...

Yu-You Chen, 陳育佑

碩士 / 國立高雄餐旅大學 / 運輸與休閒服務規劃碩士學位學程 / 102 / This study project attempts to plans and design activities on cabin safety through situational learning experience to elementary students. The students are expected establish cabin safety concepts and aviation risk cognition through participating in activities. The implementation of aviation safety does not gain much focal point as it is supposed to. For optimizing cabin safety education with the greatest effects within limited period of time, it is cruci...

Chih-Hao Su, 蘇志昊

碩士 / 國立臺灣海洋大學 / 河海工程學系 / 103 / This study modified the structure type of a double-row curtainwall pile-supported breakwater (CPB) to strengthen the hydrodynamic performance. At first, we changed the seaside CPB from a vertical structure to an inclined structure termed an inclined curtainwall pile-supported breakwater (inclined CPB). Second, this study referenced Kouno and Nakamura (2009) to combine a wave-absorbing chamber with the inclined CPB. The resulting structure, which was termed a water-...

Fang Pin, 方斌

碩士 / 國立成功大學 / 工業管理科學系碩博士班 / 90 / Abstract Cabin safety reduces fatalities and injuries resulting from an accident and provides for a safe environment for passengers and crew members in and around an aircraft. This research through surveying domestic passengers’ perception of cabin safety, aviation safety risks, flight security and the conditions of safety briefing could be for future reference for establishing aviation safety information education on promotion, execution, and training. The find...

Hung-Yi Cheng, 程弘義

碩士 / 國立中興大學 / 土木工程學系所 / 99 / It is well known that a perforated-wall caisson breakwater reduces not only the wave reflection but also the wave forces. In this paper, the numerical simulation was presented to investigate the characteristics of waves on the caisson breakwater with trapezoidal wave-chambers which consists of two layers of slit wall. The three-dimensional RANS with RNG turbulent model was applied for the numerical simulation that was implemented with a CFD code, FLOW-3D. The numeric...

Cheng, Ti-Yu, 鄭狄祐

碩士 / 國立交通大學 / 運輸與物流管理學系 / 104 / Cruise companies have a unique sales model in Asia. They’ll sell cruise cabins to several travel agents first. Then travel agents will sell those cabins to customers. Several travel agents will share the cabins fairly. But this sales model has some shortcomings. Furthermore, cruise companies would like to learn and understand the characteristics of customers from Asia. So cruise company would like to sell a part of cabins by itself. This search will build cruise c...

Zhong-JunChen, 陳仲軍

碩士 / 國立成功大學 / 機械工程學系 / 104 / This thesis is aimed to investigate the regulation problem of thermal comfort and control strategy configuration for cabin environment of electric vehicles (EVs). Local thermal comfort is emphasized in the air supplying process. Thermodynamic model to include local thermal comfort is established. To reduce energy consumption is also a significant issue in this thesis. Fuzzy Linear Quadratic Regulation (FLQR) is used to achieve satisfactory performance in addition ...

Po-Chun Wu, 吳柏君

碩士 / 建國科技大學 / 電子工程系暨研究所 / 102 / According aircraft fault data statistics show that when the 97-year period to 101 aircraft for flight recorder, the failureto account for up to failure from the cockpit camera blur filter chip internal influence, from a total of 52 failures, resulting in not shooting on location video screen fighter flight between. Long-term use by the air filter sheet humidity and temperature affect the majority of the atomization phenomenon has generated, based on a clear shot f...

Shin-Ju Tso, 左心如

碩士 / 元智大學 / 工業工程與管理學系 / 91 / Airline industry usually implements yield management to rise profit. In order to attain the maximal profit, airline companies should sophisticatedly allocate the seats under different fares. In this research, a dynamic probability approach and a decision support system based on case-based reasoning are proposed. These proposed approaches can accept or deny a request according to the current conditions of seat inventory including arrival rates of customers, decision p...

Shih-yun Lin, 林詩韻

碩士 / 國立臺南大學 / 機電系統工程研究所碩士班 / 99 / The purpose of this study is to solve the overheated problem in the operation of the hyperbaric oxygen chamber. The process of operation during compression in the hyperbaric oxygen chamber, and with interior after the addition of heat generated the cabin after the internal overheating problem. This study optimizes these to achieve the optimal performance. In order to achieve better cooling methods, we proposed two methods of effectively cooling system, this meth...

Cheng-Ming Hong, 洪晟銘

碩士 / 國立中央大學 / 太空科學研究所 / 104 / Space payload laboratory is the first institute in Taiwan that has the plasma simulation equipment. Since Ion Probe for Sounding Rocket V to Advanced Ionospheric Probe for FORMOSAT-5 satellite, the plasma simulation chamber provide the test environment for design and calibration. It consists of vacuum chamber、vacuum pumps、pressure meter、plasma source and Langmuir probe. In order to integrate all subsystem and the need of experiment, we build a monitor and control sy...

廖芳逸

碩士 / 中華科技大學 / 飛機系統工程研究所在職專班 / 105 / From then till now, it didn’t install sensor on former helicopters. When the door lock was broken, the mechanics could know and fix as soon as possible. In addition to, it didn’t break easily. In the nowadays, almost new choppers are digitalized. The cockpit doors in the modern helicopters are equipped with micro-switch. This switch is often opened and closed, so it caused the micro-switch elasticity of fatigue or damaged, even the door lock is good. If the ca...

Chien-Min Chen, 陳建閔

碩士 / 國立成功大學 / 土木工程學系碩博士班 / 94 / The efficiency of the containership’s loading and unloading process plays an important role in the container terminal working. This paper is concerned with the container pre-marshalling operation and the loading plan. We design a mathematical model to simulate the shifting of containers. In this research we use a network based optimization model to present terminal space and the operation of rail cranes, quay cranes, and internal trucks. Flow in the network co...

Yuan-ShengHuang, 黃源聖

碩士 / 國立成功大學 / 航空太空工程學系碩博士班 / 100 / The main goal of this thesis develops a deployer which can accommodate the CubeSat. The deployer connects with the rocket, and protects the CubeSat and main satellite. When the rocket arrive the orbit, the deployer can deploy the CubeSat into orbit. This thesis present a process that design and manufacture the deployer. With the commercial software of the finite element method, ANSYS, the launch environment of the PSLV rocket was simulated. In the simulation, t...

Yu-Te Shen, 沈裕德

碩士 / 國立中央大學 / 太空科學研究所 / 99 / In order to understand the phenomena in the ionosphere, one of the important methods is the in-situ measurement which acquires plasma parameters directly from the plasma. There is existence of both neutral gas and space plasma in the ionosphere, making electron temperature and density important parameters. The purpose of this thesis is to develop an electron temperature probe which can be applied to measure plasma electron temperatures in space environments such as t...

Chang Chun Min, 張俊敏

碩士 / 國立高雄應用科技大學 / 應用工程科學研究所 / 99 / In view of limited oil and the rise of environmental protection, the development and use of clean recyclable energy has become global consensus, among which the development of solar vehicle has become the focus of the world.“Apollo Solar car”developed by K.U.A.S.is the classic works.“Apollo Solar car” is a racing car, which stresses design of low wind resistance for reducing wind resistance. However, the cockpit space is small and hot, so it is necessary to pay...

Tseng, Shi-Jin, 曾旭進

碩士 / 國立中央大學 / 機械工程學系 / 85 / The method of active control of absorbers, equipped in a cabin, for reducing the vibration of the cabin and its interior sound field, is studied. In the text,a closed cylindrical shell is simulated as the cabin and the distribution of the sound pressure in the cabin from experiments as the excitation force. The displacements will be solved on the basis of the Hamilton's Principle...

Hsuan-Chih Lee, 李玄之

碩士 / 國立交通大學 / 工業工程與管理系 / 88 / This study researches the factors that affect the performance of the automated systems in Taiwan's Military aircraft and it's pilots' ability to understand and properly utilize the systems. The objective of the research is to help better understand why, when and how a pilot chooses to, or not to use the automated system. By better understanding the pilot's reasons, the systems can be tailored to improve its performance and safety. The followin...

Wei-Yu Lu, 盧威宇

碩士 / 國立海洋大學 / 造船工程學系 / 83 / Recently,the inelastic bending analysis in reinforced concrete slab before collapse has been undertaken extensively by using the yield line theory issued by K. W. Johanson in 1962. The author intends using the self-developed cut-off method to rectangular hatch cover plate so as to induce the stiffeners layout principe for establishing the optimal design algorithm. The sequential ...

Chih-wei Chien, 簡志維

碩士 / 國立臺灣科技大學 / 工業管理系 / 99 / Aircraft interior is the first impression an airline company gives it to passengers. It represents company’s image as well as distinguishing signature in addition to the appearance of the aircraft. Because of the variety of interior kinds, material science, mechanical engineering and textile, plastics, chemical specialties are involved. Interior Industry development is quite suitable for domestic small and medium-sized business entities from author’s perspective. ...

Ching-Ching Cheng, 鄭菁菁

碩士 / 國立臺灣科技大學 / 工業管理系 / 99 / Flight attendants are responsible for the safety management of cabin, and they have to effectively evacuate passengers to ensure their safety, especially when emergent incidents take place. Therefore, the sobriety and alertness of flight attendants during their duty time are closely related to the aviation safety of passengers. Because long haul flight and transmeridian flight are usually scheduled at night, flight attendants have to adjust their biological clock and...

Yu Lin Kao, 高幼玲

碩士 / 國立臺灣海洋大學 / 商船學系所 / 98 / In recent years, Aquatic Nuisance Species (ANS) introduced via the ship’s ballast water is becoming an increasingly detrimental ecological issue. Therefore, as a remedy for this shortcoming, a convention — The International Convention for the Control and Management of Ship’s Ballast Water and Sediments 2004 — formulated by the International Maritime Organization (IMO) was established. The convention requires all ships to have a ballast water treatment system installe...

Chih-ming Lin, 林志明

碩士 / 國立臺南大學 / 機電系統工程研究所碩士班 / 98 / The equipment of the middle pressure oxygen cabin in health care helps human to get more oxygen. The factors of air pollution due to industrial development, deforestation due to growth of population and habitat, unclean blood vessel, the stressfulness of life and lack of exercise lead to the plight of lack of oxygen. The lack of oxygen is proven to be a reason of ageing and diseases. It leads to the negative change of physiology and psychology in daily life, or ...

Hui-HuaYang, 楊慧華

博士 / 國立成功大學 / 交通管理學系碩博士班 / 98 / Cabin safety standards and training are important for maintaining safe aircraft operations, and aim at increasing the survival rate by minimizing hazards in the cabin and its environment to reduce the effects of an accident. 　　This study designes a comprehensive survey based on discussions with aviation safety experts. And next a new framework of four major cabin-safety indicators that influence occupant survivability is proposed: (1) aircraft design and loading, ...

Chien-ChinChiu, 邱建欽

碩士 / 國立成功大學 / 機械工程學系碩博士班 / 99

Wei-Jen Wu, 吳維真

碩士 / 國立交通大學 / 運輸科技與管理學系 / 96 / The ability to match aircraft cabin service to dynamic market changes is one of the crucial factors deciding the profitability of an airline. There exist business travelers who prefer and are able to afford the high fare of luxurious first-class cabin as well as tourism travelers seeking for cheap air tickets due to budget limits. The cabin-class choice from different travelers and trip purpose on the route determine seat utilization, thereby the revenue and tota...

Dai, goe-wne, 戴國文

碩士 / 國立中央大學 / 機械工程學系 / 84 / A closed cylindrical shell conjection with the floor as a simple model of the fuselage of an aircraft. For reducing the vibration of the fuselage and the resulted interior noise due to external point forces, uniformly distributed forces, or the sound pressure forces raised by the propellers, several dynamicabsorbers are attached to the fuselage. In the research, the vibration...

Chang-Xian Liu, 劉昶賢

碩士 / 國立成功大學 / 航空太空工程學系碩博士班 / 95 / With the increase of living standard nowadays, automobiles are not only a mean of transportation tool but also equipped more capability functions, better quality and much comfort. In this study, by using experiment and numerical simulation, thermal comfort for passengers in an air-conditioned automobile cabin is numerically investigated with a PMV indicator and a PPD indicator for finding a best temperature. For the experiment part, the model of an experimental ...

Jui-Chuan Lee, 李瑞權

碩士 / 長榮大學 / 職業安全與衛生研究所 / 95 / This study is aimed to investigate the size distribution and concentration of the secondary organic aerosol resulting from the reaction between terpene (600 ppb), commonly found in air freshner, and ozone (100 ppb). The experiments were conducted in a controlled environmental chamber to simulate different combinations of temperature (20℃、25℃、30℃) and relative humidity (RH 30%、50%、70%). The results showed that the particle concentration could reach 1×106 particles/cm...

Chui-An Chiu, 邱垂銨

碩士 / 國立中央大學 / 機械工程研究所 / 95 / The purpose of this paper is to demonstrate the design approach for the mechanical structurre of reentry capsule for Sounding Rocket VI Mission in Taiwan. The design of the reentry capsule must ensure the re-use of the carried precise instruments and the retrieve-back of valuable data. The reentry capsule must also resist high reentry heat and suffer the impact forces when separating from the rocket and falling into the water. Meanwhile, during reentrying into the er...

Kuang-Yang Chou, 周光揚

碩士 / 國立虎尾科技大學 / 航空與電子科技研究所 / 102 / The aim of the study is to investigate and improve the wireless communication performance inside an aircraft cabin. The electromagnetic interference path loss between inside and outside the aircraft cabin is thus studied by way of simulation and experimental measurement. Thereafter, design a planar omni-directional and circular polarization antenna to solve the problem of the multipath interference in the cabin and therefore to increase the transmission efficie...

Kuan-Chang Li, 李冠璋

碩士 / 國立虎尾科技大學 / 車輛工程系碩士班 / 101 / This thesis research into restraining the vehicle cabin temperature when the vehicle is stop . Owing to the reasons of the high temperature, A DC air-conditioning system with solar panel module was proposed to restrain the temperature of cabin when the vehicle is stop. The temperature can be decreased to 13℃ at windscreen, 6 ℃ at seats and 8 ℃ in the center of the vehicle very quickly, Vehicle temperature can be kept the same as outside. The driver will get comfo...

Chang-Heng Yen, 葉昶亨

碩士 / 國立虎尾科技大學 / 機械與機電工程研究所 / 98 / This research is mainly aims in the vehicles cabin the hot flow field to analyze the discussion; When the vehicles under the sun, then the vehicles cabin''s space is heated up in the solar radiation, Under the cabin temperature for exposure studies, mostly air-conditioned cooling method; cooling method in the static state, the system manufacturing cost of expensive and complex and do not meet the economic effects. Thermodynamic theory of this thesis re...

Lien, Tsung-Wei, 連琮偉

碩士 / 國立臺灣海洋大學 / 航運管理學系 / 105 / Ballast water management convention (BWMC) was established and entered into force by the International Maritime Organization (IMO), which must perform the installation of the BWMS before its entry into force on 8 September 2017, With the exception of the specific ships, the ships of fixed inland lines, and the ship’s capacity of ballast water more than 400 tons, all ships are required to enforce the installation of the ballast water management system (BWMS) before ...

Meng-HsuanLee, 李孟璇

碩士 / 國立成功大學 / 民航研究所 / 98 / Human factors are the main cause of fatal accident in flight safety. Our laboratory keeps working on culture these years. Among them, the interpersonal relationships are evaluated as the most effective variables by the statistics in implement of CRM. The CRM questionnaire in 2005, interviews pilots from different countries around the world, show that the national and foreign pilots, showing somehow different tendency in the treatment of human relations. It approves t...

李啟安

碩士 / 國立成功大學 / 交通管理學系 / 89 / One of the biggest challenges container shipping carriers faces is to allocate containership slots in an efficient, effective manner, and in turn increase their revenue, namely, yield management. Atop of an efficacious slot allocation mechanism, success can only be achieved with a thorough understanding in the maximization of containership slot utility. For instance, differences in regional demand mean that apart from allocating slots for loaded containers, contain...

Yen-ting Chen, 陳彥廷

碩士 / 國立中央大學 / 光機電工程研究所 / 101 / This paper is aiming at a main control system to complete Sound Rocket Ver. 8 re-entry capsule mission. To verify the function, process kinds of environment and function test. The main control system governs a power management module, a pyrotechnic module, and the following subsystems: Magnetic field sensor subsystem, Gravity and Gyro sensor subsystem, Radio subsystem, Cold Gas Propulsion Control subsystem, and GPS subsystem. With the proper working of the above sy...

Chen-Huei Huang,, 黃臣暉

碩士 / 國立中央大學 / 機械工程研究所 / 97 / The main purpose of the thesis is to design a reentry capsule for the Taiwan sounding racket mission 8. The reentry capsule is improved in this project based on the result of then sounding racket mission 6. The 2.4GHz channel communication module is attached to the reentry capsule,for example,which can increase the probability of rescue. In addition, a new payload module, the rocket combustion system, is included in the reentry capsule for attitude control test in th...

HUANG,WEI-MIN, 黃慰民

碩士 / 國立海洋大學 / 航運技術研究所 / 78 /

ZHONG, WEN-HUI, 鍾文輝

碩士 / 國立成功大學 / 機械工程研究所 / 77 /

SHAN CHI-CHIH, 單齊之

碩士 / 開南大學 / 空運管理學系 / 96 / A Purser plays a pivotal role in the ranges of navigational services. Superior quality services to the passengers rest on flight attendants led by a competent purser who in turn brings on a comfortable and enjoyable atmosphere in the cabin. Nevertheless if the aviation industry has not selected highly qualified pursers which led to problems of inferior service in the cabin, passenger loyalty in the airline patronage would be drastically reduced, hence affecting the over...

Chih-chien Lin, 林智堅

碩士 / 國立中央大學 / 機械工程研究所 / 99 / The purpose of this thesis is to demonstrate the design approach for the mechanical structure of reentry capsule for Sounding Rocket VIII Mission (Abbreviated as SR08) in Taiwan, and to verify the feasibility of the design numerically and experimentally. The major goal of Sounding Rocket VIII Mission is to continue the plan of the reentry capsule for Sounding Rocket VI Mission (Abbreviated as SR06) with additional new tasks. There are three new main tasks developed i...

Wu,Chia-Chang, 吳佳昌

碩士 / 國防大學理工學院 / 機械工程碩士班 / 100 / Wheeled armored vehicles of national defense, independently developed of armored vehicles. Derivatives of different types of vehicles in response to operational requirements,such as armoured personnel carrier, fighting armored vehicles, nuclear biological and chemical detector vehicle, ambulance and communications command vehicle. in this study for public displaypersonnel carriers. The past, armored vehicles equipped with the firepower and excellent protection equ...

Ya-LingKao, 高雅鈴

博士 / 國立成功大學 / 交通管理學系碩博士班 / 100 / Flight attendants, typically characterized as being engaged in ‘emotional labor’, often experience stress when performing their work, and this may result in negative job outcomes and health problems. The stressful work conditions may lead to employee turnover and health problems. In addition, the human resource demand of the airline industry increases with economic recovery in recent years, which in turn lead to the high turnover rate of Taiwanese flight attendan...