Yang, Hui-Wen, 楊惠雯

碩士 / 國立清華大學 / 動力機械工程學系 / 97 /

Tsu-Yuan Chin, 秦子媛

碩士 / 國立中興大學 / 園藝學系所 / 97 / The aim of this study was focus on the Pahleanopsis I-Hsin Cream ‘KHM246’ physiology effect caused by water deficient of root during bare-root transportation, and expected using chemical pre-treatment to alleviate the effect of water stress and to reduce the injury, so that the plantlets could recover root vigor as soon as re-plant it . Gel and sugar ester were two types of moistrum that generally using in cosmetic industry these days. We selected these two moistrum ba...

Shao-Wei Lu, 呂紹維

碩士 / 國立嘉義大學 / 園藝學系研究所 / 101 / Malabar chestnut is the most important export pot flower in Taiwan. However, there are still many key techniques needed to overcome. This study aimed to investigate the desiccation tolerance and prolonging the longevity of seed in Pachira macrocarpa. Furthermore, in order to comprehend the recalcitrant trait in Pachira macrocarpa seed, this study also investigated the relationship among desiccation, storage and antioxidative capability in seed. Beside, heating to ac...

Shou-Hung Weng, 翁壽鴻

碩士 / 國立中央大學 / 資訊管理學系碩士在職專班 / 96 / The connector manufacturer of our country moves with customer''s factories of low reaches and goes to the continent to make the investment and already become the inexorable trend. The global original material rise and the customer reduction act under two pressures after 2007, causes the coupling manufacturer to slide hurriedly faced with the gross profit the pressure difficult position. In the information science''s and technology''s application, how does the co...

林怡秀

碩士 / 國立嘉義大學 / 園藝學系研究所 / 103

Yuan-Ho Chen, 陳淵河

碩士 / 國立成功大學 / 都市計劃研究所 / 81 / The earlier researches in the area of freight demand were concentrated on the problem of mode competition. Gradually the idea of analyzing the short-run freight demand using inventory theory has been proposed and commonly accepted. Since then, the research in freight demand analysis has extended from only mode choice to the choice of mode as well as shipment size. Fro...

Chung, Chung-Che, 鍾仲哲

碩士 / 國立屏東科技大學 / 工業管理系所 / 100 / This study develops two integrated inventory models to determine the optimal production and shipment policy under conditions of controllable lead time, learning effect, and deteriorating items. We consider that the lead time can be shortened at an extra crashing cost, which depends on the length of lead time to be reduced. Additionally, the deterioration of items and learning in production are considered simultaneously. We derive the total cost functions and shows ...

Shin-Chan Ting, 丁士展

碩士 / 國立交通大學 / 交通運輸研究所 / 82 / When a ship costs millions of dollars and its daily operating expenses are tens of thousands of dollars, proper fleet deploy- ment has the potential of reducing shipping cost and improving utilization of vessels. Fleet deployment is numerically complex work. Vessels of a fleet can not be allocated optimally by empirical judgment of operating personnel and the complex work will r...

Kuang-Hao Lin, 林光浩

碩士 / 元智大學 / 工業工程與管理學系 / 91 / It is vital for enterprises to maintain careful management of inventory in order to keep high levels of customer service. We study a multi-echelon, periodic-review (R, S) inventory system where direct shipment can be used to reduce the risk of stockout. The system consists of a distribution center, a warehouse and multiple retailers. Beside normal ordering channels from the warehouse, inventory in retailers can also be replenished by shipment directly from the distri...

LAI, CHIAO-FANG, 賴蕎汸

碩士 / 逢甲大學 / 工業工程與系統管理學系 / 105 / This paper uses Six Sigma, the improving process of Define, Measure, Analyze, Improve and Control (DMAIC), to improve the quality of TFT LCD panel and the TFT-LCD Cell process inspection personnel missed inspection defects to raise product shipments yield, with case study on TFT LCD Company. To check the defects and provide better quality of the ship effectively is the main goal of the enterprise. The defects of TFT-LCD contain point defect, line defect, the outwa...

Chun-WeiChen, 陳駿崴

碩士 / 國立成功大學 / 工業與資訊管理學系專班 / 100 / Fuel market of the early days of Taiwan-based liquefied petroleum gas (commonly known as bottled gas), liquefied petroleum gas can filling into cylinders, whether in mobile or use all the powerful convenience, so early fuel market can be said is completely dominant LPG. However, while the gas explosion accident is heard, the government in recent years began to strongly promote the fuel change to the liquefied natural gas instead of the hope that by stability of ...

李潔芝

碩士 / 國立臺灣科技大學 / 工業管理系 / 92 /

Zhi-Liang Wang, 王智亮

碩士 / 國立嘉義大學 / 農學研究所 / 99 / A new favorite product of using the young seedlings to produce mini-plant types of 18-cm green braid seedlings of Malabar Chestnut in Japanese, the U.S. and European markets. This study was to investigate the shade, sowing medium, time of water loss and retardants on the growth and quality of green braid seedlings in Malabar Chestnut. The experiment results showed that 60% and 80% shading treatments were compared to the control group, not only had a significant effic...

Shu-Hsien Li, 李書賢

碩士 / 淡江大學 / 運輸管理學系碩士班 / 96 / Under the keenly competitive environment and avoid to waste cost by bullwhip effect, the enterprises beginning to join the supply chain collaboration. The recent collaborative initiative, termed Collaborative Planning, Forecasting, and Replenishment (CPFR®　　), has begun to gain wide acclaim for the benefits it delivers. The new evolution of CPFR is to extend the core elements to include the transportation component, termed Collaborative Transportation Management (CTM...

Ying-Ming Chen, 陳應明

碩士 / 國防大學管理學院 / 資源管理及決策研究所 / 97 / It is observed that the shipment period of military vehicle material supply chain is far behind the criteria of the supply regulation,which is 10 days. This study is focused on the alternatives to improve such in-efficiency. After comparing military (vehicle material) and local commercial supply chain,it is revealed that the military shipment process if too complicated to achieve regulation’s criteria. And two alternatives to improve such efficiency gap are rais...

Kuan-Ju Fuh, 傅冠儒

碩士 / 國立臺灣大學 / 商學研究所 / 106 / Recently, e-commerce had developed and grown significantly. Consumers are likely to be more time-sensitive. This study aims to predict the needs of products and reduce the processing time in warehouses which take to pick up the products need to ship and wrap it up. And this study also decides the criteria to determine the processing orders. The fast-shipment business model have shortened processing time and determined processing orders so that consumers can receive th...

TSAI-HSIANG HSIAO, 蕭蔡翔

碩士 / 國立臺灣科技大學 / 工業管理系 / 95 / In this research, we investigated a distributor how to select multiple products from multiple suppliers which considered simultaneously deciding how much to purchase from each supplier, and how much to ship to distribution center by truckload or less than truckload. A mixed integer programming model is formulated to select vendor and determine the order quantity, and applied to a case study from a computer distributor in Taiwan. This model considers the cost of purch...

1. Problem one: Shipment planning in a dynamic environment. The planning of air cargo logistics is a complex endeavor that involves the collaboration of multiple logistics agents to deliver shipments in a timely, safe, and economic manner. Airfreight forwarders coordinate and manage shipments for their clients, and with the development of Internet logistics platforms, airfreight forwarders can now trade jobs and resources with other participants effectively. The incorporation of trading alternat...

Huang,Yen-Chu, 黃嬿曲

碩士 / 國立臺北大學 / 企業管理學系碩士在職專班 / 100 / It has been thirty years since Taiwan’s electronic industry, from there, we build different category of companies from component, system design/ integration, OEM/ ODM/ EMS, application service, own brand. Supply chain has been developed to be flexible, complete and competitive to fulfill one stop shopping for any kind of customer. From year 2000, more and more system integrator shift their direction from traditional hardware OEM/ ODMs to design and build a comp...

Yang Ya Ting, 楊雅婷

碩士 / 明新科技大學 / 工程管理研究所 / 96 / Under the markets which have uncertain demand, a stock-out occurs whenever the stock of an item is in sufficient to satisfy demand and it could either be fulfilled with a backorder or result in a lost sale. In a typical supply chain, a manufacturer can offer a price discount on the stock-out in order to secure more backorders and reduce shortage cost resulting from lost sale. This study chooses a typical CCFL supply chain that includes the following members: material...

Yin, Ya-Fen, 鄞雅芬

碩士 / 明新科技大學 / 工程管理研究所 / 93 / Due to limited availability of natural resources and growing concern for the environment, more and more countries establish stringent laws for “product take back”. Often manufacturers are assigned to be responsible for the products after customer use and at the end of their life-cycles. It is expected that in few years reverse logistics will be a crucial element in determining the way in which products will be designed, produced and distributed. In this paper we cons...

Wei Lu, 盧葳

碩士 / 國立嘉義大學 / 園藝學系研究所 / 95 / Phalaenopsis orchid needs short- or long-term shipping while exporting to Japanese, Korea, Europe and United States. But, the orchid plant selling abroad couldn’t process low-temperature forcing treatment until adjusting growth well. Then, such increasing growth period would raise production costs. On the other hand, shipping environment and pre- and post-transportation treatments would affect post-planting stalk emergence and flowering quality differently. For decre...

Yeh Ming-Liang, 葉明亮

碩士 / 國立中興大學 / 農產運銷學系 / 82 /

KUO-HSIANG CHEN, 陳國祥

碩士 / 國立臺灣科技大學 / 工業管理系 / 98 / The Global Notebook sales demand forecast is the world's one of the important issues of economic development, because laptop parts from hundreds of the combination .For example: LCD panel, battery, CPU, Memory, motherboard, case, keyboard, a variety of IC and components. Therefore, its sales volume represents the information technology industry as a whole in the development and growth. Therefore hopes to make this prediction notebook computer-related industry su...

Xie Lei. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2005. / Includes bibliographical references (leaves 50-53). / Abstracts in English and Chinese. / Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Related Literature --- p.2 / Chapter 2 --- Notations and Model Formulation --- p.8 / Chapter 3 --- The Optimal Replenishment Policy --- p.15 / Chapter 3.1 --- Preliminaries --- p.15 / Chapter 3.2 --- The optimal replenishment policy at the second decision point --- p.17 / Chapter ...

許加融

碩士 / 國立交通大學 / 管理學院管理科學學程 / 99 / The establishment of a suitable and effective model to explain the sales of motherboard is quite important in the fields of technology marketing and forecasting. This study seeks to utilize the Bass (1969) model to illustrate the dynamics of global motherboard market. We focus on quarterly data of the global motherboard shipment units from 2003 to 2010. The empirical results show the significant influence of consumers’ communications on the sale of motherboards. P...

Wong Wai Hung. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2004. / Includes bibliographical references (leaves 102-103). / Abstracts in English and Chinese. / LIST OF TABLES --- p.iii / LIST OF FIGURES --- p.v / ABSTRACT --- p.vii / Chapter Chapter 1. --- Introduction --- p.1 / Chapter 1.1 --- Goals and Significance --- p.1 / Chapter 1.2 --- Thesis Organization --- p.2 / Chapter Chapter 2. --- Review on Air Cargo Industry --- p.3 / Chapter 2.1 --- The Position of Air Cargo Logist...

Lai, Minghui. / Thesis Ph.D. Chinese University of Hong Kong 2014. / Includes bibliographical references (leaves ). / Abstracts also in Chinese. / Title from PDF title page (viewed on …).

Shen-Yu Chang, 張石煜

碩士 / 國立臺灣海洋大學 / 商船學系所 / 93 / Multiplex factors have to be taken into consideration while applying ship motion analysis to harbor design. A Real-Time Simulation Study should be performed on Ship-handling aspects in planning Sen-Ao coal terminal of Taiwan Power Company. Feasibility evaluation was based on experiments conducted by experienced pilots, and maneuvering of two Coal Carriers of 70,000 DWT and 88,000 DWT into the planned layout port under the weather condition of 15 m/sec of NE wind and ...

Cheng- Yu Chang, 張正鈺

碩士 / 國立臺灣海洋大學 / 通訊與導航工程學系 / 99 / This work uses the National Taiwan Ocean University(NTOU) Shiphandling Simulator (SHS) as the testbed to examine the performance of three types of guidance schemes that guide a ship towards a prescribed straight water channel. Specifically, the first two types of guidance methods are based on image processing technique; namely, the fore-aft leading mark and the left-right leading mark guidance methods, and the third one is a GPS-based Line-of-Sight (LOS) guidance...

Cheng, Chuan-Chang, 鄭傳璋

碩士 / 國立高雄應用科技大學 / 土木工程與防災科技研究所 / 94 / The shiphandling simulator is a typical “man in the loop” simulation. The visual scene system is the important component of a shiphandling Simulator that influences the degree of reality and the simulation result of ship handling. The construction of the visual scene database is very critical for a visual scene simulation. Geomatics is an essential method to build a visual scene database. Geomatics technology is 3S (Global Positioning System, Remote Sensing,...

ZHAO,YU-SHENG, 趙榆生

碩士 / 國立海洋大學 / 航運技術研究所 / 79 /

Ilma Mufidah, Ilma Mufidah

博士 / 國立臺灣科技大學 / 工業管理系 / 106 / Occupational accidents are a critical issue in many developing countries. According to the Indonesian Ministry of labor, although the accident rate in Indonesia decreased by 8% in 2015-2016, the death rates increased by 349,4%. Most accidents were found in the construction industries, which include the shipbuilding industries. The Cabotage Law implementation in Indonesia and the current president's instruction to boost local shipbuilding industries to strengthen the...

Wei Tann, 譚瑋

博士 / 國立成功大學 / 系統及船舶機電工程學系碩博士班 / 95 / In order to increase competitive advantages under the impact of the globalization economies, shipbuilding enterprises optimize their organizational processes, and undertake new manipulations of collaboration in particular. Advances in information exchange technology (such as the Internet), have made communication in “real time” possible irrespective of the geographic location of participants that has dramatically increased connectivity and productivity for in...

Chia-Chan,Chou, 周家黔

博士 / 國立交通大學 / 經營管理研究所 / 91 / The shipbuilding output for Taiwan had been 4th in the world until 2001; however, at that time, it dropped to the 7th. Currently, the world shipbuilding capacity greatly exceeds the demand and this disparity could grow to 40% by 2005. Facing this turning point, this study formulates a conceptual framework through literature review to re-examine the international competitive position of Taiwan’s shipbuilding industry; furthermore, to realize the industrial core compet...

Bond, Andrew S., 1975-

Thesis (S.M.)--Massachusetts Institute of Technology, System Design & Management Program, 2005. / Includes bibliographical references (p. 210-214). / Continually declining Navy surface combatant acquisitions, the war on terror, shifting Congressional priorities and a consolidated shipbuilding industrial base are forcing fundamental changes in the defense shipbuilding market. Shipbuilding in the United States is a mature industry that requires an experienced workforce and a predictable workload t...

Delaney, Monique

The colonial contribution to the French naval shipbuilding industry in the seventeenth and eighteenth centuries, explored within the context of the forest from which the resources for the industry were taken, was a remarkably successful venture that came to an end with the onset of war. In the past, the end of the French naval shipbuilding industry in New France has been attributed to the action or inaction of France that resulted in the inefficient use of forest resources. Issues of inter...

Adams, Jonathan,

Doctoral diss.--Department of archaeology--Stockholm university, 2003. / Bibliogr. p. 209-232.

Cha, Jaekwon.

Thesis (Ph. D.)--University of Kansas, 2004. / Includes bibliographical references (leaves 283-311).

Nam, Hwasook Bergquist,

Thesis (Ph. D.)--University of Washington, 2003. / Vita. Includes bibliographical references (p. 505-531).

Nam, Hwasook Bergquist,

Thesis (Ph. D.)--University of Washington, 2003. / Vita. Includes bibliographical references (p. 505-531).

Polzer, Mark Edward

In 2002 and 2003, the Institute of Nautical Archaeology excavated the remains of an East Greek ship that sank off the coast of Pabuç Burnu, Turkey, sometime in the second quarter of the sixth century B.C. The scant remains of the vessel’s hull have provided the first archaeological evidence for laced shipbuilding in the Aegean. The diagnostic features preserved in the hull fragments are consistent with those of Greek laced construction, as evidenced in other shipwrecks from the same period fou...

Freihofer, James T., Beach, Daniel S.

No description available.

Adams, Jonathan

No description available.

Brown, Alexander Crosby

No description available.

Jarvis, Michael J.

No description available.

Seubert, Thomas W. (Thomas William)

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1988. / Includes bibliographical references. / by Thomas W. Seubert. / M.S.

Dobson, Aaron T. (Aaron Travis)

Thesis: Nav. E., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014. / Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, Engineering Systems Division, System Design and Management Program, 2014. / "June 2014." Cataloged from PDF version of thesis. / Includes bibliographical references (pages 76-80). / As the sophistication and technology of ships increases, U.S. Navy shipbuilding must be an effective and cost-efficient acquirer of t...

Alvarran, Dominic T. (Dominic Thomas)

Thesis (Nav. E.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2013. / "June 2013." Cataloged from PDF version of thesis. / Includes bibliographical references (p. 79-81). / It is suspected that the lack of commercial shipbuilding available in the US resulting in the consolidation of the US shipbuilding industry as a whole limits the negotiating capacity for the US Navy and promotes suboptimal contracts that continuously produce major cost and production time overruns....

Marcil, Eileen Reid

Québec Université Laval, Bibliothèque 2013