Peebles, Robert H. (Robert Houston)

To show how mass-production principles and welding in shipbuilding altered the economic conditions along the Gulf coast, this investigation relied on a chronological narrative to illustrate the importance of timing in addition to identifying the significant factors causing the changes. The account begins with a description of the Gulf coast shipyards during World War I and ends shortly after World War II. The necessary factors for Gulf coast participation in shipbuilding are developed in two cha...

Tejpal, Navin

No description available.

Clark, Eric D.

Thesis (M.S. in Systems Engineering Management)--Naval Postgraduate School, September 2006. / Thesis Advisor(s): John Osmundson. "September 2006." Includes bibliographical references (p. 57-59).

Pearce, Heinz J.

Thesis (M.S. in Management) Naval Postgraduate School, December 1997. / Thesis advisor(s): Nancy C. Roberts, Roger D. Evered. Includes bibliographical references (p. 147-148). Also available online.

Stegelman, Michael S.

Thesis (M.S. in Systems Engineering Management)--Naval Postgraduate School, September 2009. / Thesis Advisor(s): Osmundson, John. "September 2009." Description based on title screen as viewed on November 6, 2009. Author(s) subject terms: Manpower, Marine Welder, Organizational Structure, Labor Workforce Development, Requirements Management, Marine Labor Crafts, Trade Union, Gap Analysis Includes bibliographical references (p. 73-76). Also available in print.

Sartas, Murat

This thesis aims to analyze the growth dynamics of the Turkish commercial shipbuilding industry between 1992 and 2008. It tests the hypotheses whether each of the 14 variables identified in the literature are valid in explaining the growth of Turkish commercial shipbuilding industry between 1992 and 2008 and if there is a dierence in the importance of these variables through utilizing secondary data as well as the results of the semi structured interviews made with 16 experts and managers repres...

Watson, Larry James.

No description available.

Ebright, Arthur L.

No description available.

Palmieri, John Joseph.

No description available.

Ames, Richard Earl, Maxon, Bruce Ethan, Coady, Philip James

Distinguished Alumni Award Program author. RDML Philip J. Coady Jr. / USN (Ret) (Presented 27 Mar 06) / The thesis considers the impact of return on investment, progress payments, and cash flow in the shipbuilding industry. Analysis is devoted to the progress payment method recommended by the Navy Task Group to Study Shipbuilding Progress Payments. An examination is made of both Government profit policy and contract financing as they relate to the shipbuilding industry. A computer model was dev...

Faircloth, Joseph Anthony

No description available.

Liston, Catherine

In this thesis we examine three aspects of procurement policy in the context of asymmetric information. In Chapter 1, we identify an incentive for the contracted firm to underinvest in the comprehensiveness of its internal accounting system, a result similar to that due to Averch and Johnson (1962). The policy implications of this distortion are analysed using both a theoretical construct and numerical simulation. In Chapter 2, we identify a class of distortions generated by the practice of payi...

Valenti, Vincent N.

The subject of shipbuilding in the Mediterranean during the Middle Ages is an integral aspect of the maritime history of this region. Characterized primarily by a fundamental shift in shipbuilding techniques, this phase also included significant developments in other seafaring practices. Yet, unlike the preceding Byzantine era, there is a very limited body of archaeological evidence available for study which can be utilized to illustrate these changes. Therefore, one must turn to alternative sou...

Maritime archaeological sites located in the inter-tidal zone are common throughout the world. Such sites are difficult to investigate yet their state of preservation often provides unique archaeological data unavailable on most terrestrial sites. This study outlines a model and a process for understanding shipyards, their contexts, and ways in which to compare particular sites and groups of sites. This study investigates the maritime landscape of historic shipbuilding sites on the Lower Eastern...

McCoy, Kathleen Marie, LCDR

Thesis: Nav. E., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015. / Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, Engineering Systems Division, System Design and Management Program, 2015. / Cataloged from PDF version of thesis. / Includes bibliographical references (pages 92-95). / Contracting for US Navy ship procurement is complex due several factors such as budgetary and political concerns, sole or near sole source environ...

Canavan, James E.

This item was digitized by the Internet Archive.

Burke, Robert Edward

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 1994. / Includes bibliographical references (leaves 75-76). / by Robert Edward Burke. / M.S.

Smith, Matthew B., Lieutenant, junior grade

Thesis (S.M. in Naval Architecture and Marine Engineering)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008. / "LTJG Matthew B. Smith, USCG." / Includes bibliographical references (leaf 82). / This thesis project will update the MIT ship cost estimation model by combining the two existing models (the Basic Military Training School (BMTS) Cost Model and the MIT Math Model) in order to develop a program that can accurately determine both a ship's acquisition cost as we...

Zhang, Jie

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 1994. / Includes bibliographical references (leaves 119-122). / by Jie Zhang. / M.S.

Taousakis, Michael.

Project report (M.S.)--Virginia Polytechnic Institute and State University, 1990. / Abstract. Includes bibliographical references (leaves 96-97). Also available via the Internet.

O'Loughlin, Patrick Ryan.

"Submitted in partial fulfillment of the requirements for the degree of Master of Business Administration from the Naval Postgraduate School, December 2007." / Advisor(s): Candreva, Philip ; Dew, Nicholas. "December 2007." "MBA professional report"--Cover. Description based on title screen as viewed on January 10, 2008. Includes bibliographical references (p. 53-56). Also available in print.

Ward, John W.

No description available.

Fitzgibbons, Thomas Arthur

No description available.

Diekemper, Jerome Vincent

No description available.

Chalfant, Julie Steele

Developable surfaces are widely used in manufacturing with materials that are not amenable to stretching. Applications include the formation of ship hulls, ducts, shoes, clothing and automobile parts such as upholstery and body panels. In shipbuilding, developable surfaces are shaped using only rollers or presses. Heat treatment is then used only to remove distortion induced by welding or other means. Doubly curved surfaces, on the other hand, must be heat treated after rolling to induce the add...

Koreisha, Nicholas Alexis

No description available.

Kavanagh, Gary Lee

No description available.

Shetelig, Haakon

A continuously increasing global competition in the ship building industry leads to decreasing margins and an increased cost pressure for Norwegian shipbuilders. The Norwegian ship designers and shipbuilders are known throughout the world for delivering complex vessel with high quality, on time. Shipowners have so far been willing to pay the price for Norwegian offshore support vessels. However, high quality products will at some point be outcompeted by less expensive solutions.An effective cost...

Kelso, William Martin

No description available.

Ford, Ben

No description available.

Athanassoglou, Minos, 1976-

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 2001. / "June 2001." / Includes bibliographical references (leaves 79-80). / by Minos Athanassoglou. / S.M.

Høegh, Morten W. (Morten Westyne), 1973-

Thesis (S.B. and S.M.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 1998. / Includes bibliographical references (p. 123-124). / by Morten W. Høegh. / S.B.and S.M.

Tubbs, Paul Burton

Thesis (M.B.A.)--Boston University

Veža, Ivica

No description available.

Jones, Joseph Matthew.

No description available.

Vellis, John Demetrius

No description available.

Klish, Theodore

No description available.

Ferrada, Nelson

No description available.

Norbye, Knut Magnus Gjertsen

In today’s global competitive market, it is getting increasingly more important to continuously improve by delivering high quality products at a faster rate and to a lower price, in order to stay competitive. In this context, companies have recently realised the significant advantages a proper engineering change management (ECM) process can yield in terms of time to market and reduced cost. Thus, there is an increased attention towards technology that can better cope with the current ECM p...

Carter, JoAnna M.

Thesis (M.S. in Systems Engineering Management)--Naval Postgraduate School, December 2005. / Thesis Advisor(s): Orin Marvel, John Gudas. Cover title. Includes bibliographical references (p. 51-52). Also available online.

WANG, CHIA-WEI, 王嘉瑋

碩士 / 國立高雄師範大學 / 事業經營學系 / 105 / The shipbuilding industry has always played a crucial role in Taiwan’s economic development. Shipbuilding equipment mainly relies on imports. In this study, agents were adopted as the main axes, which were extended to the upstream and downstream. The organization value chain and resource dependence theory were adopted to discuss how the relationships among the three sides operate and interact, namely, upstream foreign marine equipment suppliers in the industry, mid...

SHIH-FA LIN, 林世發

碩士 / 樹德科技大學 / 經營管理研究所 / 98 / he professionals, without the ability to drive the formation of organization development, organizational culture and special leadership style, are unable to survive in a competitive market. 3. Actively to be involved in the coaching staff attitude adjustment, to provide the counseling, so that employees on the company's new culture and boss will have a sense of identity, and its organizational performance will grow.

Huei-Yu Mai, 麥卉榆

碩士 / 國立中山大學 / 企業管理學系研究所 / 107 / The background of this master’s thesis is to know how shipbuilding industrial makes transformation, unbalance shipbuilding market, competitive diversity and production capacity adjustment intensely after big accidents had happened such as subprime mortgage crisis in 2008 and the bankruptcy of Hanjin shipping in 2016. The ocean industrial production volume is approx. with 1.35% of total GDP and the employment population is approx. with 0.25% which means it is not t...

Hsiang-Chung Ko, 柯翔鐘

碩士 / 國立中山大學 / 管理學院高階經營碩士學程在職專班 / 107

YU MAO-HUA, 余茂華

碩士 / 國立高雄應用科技大學 / 工業工程與管理系碩士在職專班 / 102 / Ship is a very important vehicle during the history of human civilization. The trading pattern has expanded from regions to worldwide type with the traffic becoming developed and convenient. Over 80% of trading activities are completed by shipping illustrates the importance of ships in trading today. Medium to large shipyards usually manufacture the blocks of ships with production lines. Different production line suits different ship type. Because the con...

Hsiao-ManCheng, 鄭曉蔓

碩士 / 國立成功大學 / 環境醫學研究所 / 100 / The objective of this study was to characterize welding fume and ROS emitted from different welding processes and parameters and apply above results to predit. A metal fume chamber was established to simulate two major welding processes (including flux core arc welding (FCAW) and gas metal arc welding (GMAW)) and three operating conditions of the low input power (120 A, 22 V), optimal input power (220 A, 26 V) and high input power (300 A, 30 V) for shipbuilding indu...

Pi-tzu Yang, 楊璧慈

碩士 / 國立高雄應用科技大學 / 工業工程與管理系碩士班 / 103 / Under the influence of the global competition, applying project management to improve resource efficiency in large project and shortened the duration of the project has become a new issue. This study focused on the case of large-scale project, environment and limited resources, resource allocation rules for the overall project schedule time and effects of excess allocation, and for large shipbuilding design under the limited resources to improve and research...

Hsu, Lung-ho, 徐龍和

碩士 / 國立屏東科技大學 / 科技管理研究所 / 102 / Shipbuilding industry constructed a unique competitive advantage by developing the technology as the cornerstone of future competition and using patents to protect innovation in the global competitive shipbuilding market. According to the World Intellectual Property Organization noted that the patent specification contains the nearly 90% to 95% technology information. Using patent information can reduce 60 % of the development time and save nearly 40 % of the rese...

HUANG,FUN-SUANG, 黃府祥

碩士 / 國立高雄應用科技大學 / 電機工程系博碩士班 / 104 / This thesis proposes a technology which integrates the concurrent 3D AVEVA Marine version 12 SP4.18 and support the consistency of database to solve concurrent design problem occurred on both HULL design for the field of the ship structure design in Marine Engineering and Outfitting for the outfitting items in ship design during three-dimension ship designing period. The proposed technology is first to install the AVEVA Marine software in the Kaohsiung compute...

Chine-An Wu, 吳建安

碩士 / 國防管理學院 / 後勤管理研究所 / 91 / In general, the process of commercializing intellectual property is very complex, high risky, takes a long time, cost much more than you think it will, and usually fails. This research is based on “PFG-2 Program”, the first building completion of 4000-tons modern combat vessels were built by Taiwan which is under technical support services agreement with USA . It shows how our navy and people established a complete “ the technological knowledge transfer mechanism of ...